Why it’s not possible to communicate with a modem which is connected to a PCD2.M4x60?

FAQ #101986

Due of an error in the hardware and the firmware the first series (hardware version A and B) of the PCD2.M4x60 is not able to use the analog/ISDN or GMS modem which is connected to the RS232 of the PCD2.M4x60.

The error was fixed in the hardware version C.

To be able to use the modem correctly it’s necessary to have at least a HW version C and at least a FW 1.26.15 on the PCD2.M4x60.

 

 

Categories

PCD2 / M4x60

Last update: 31.10.2016 13:46

First release: 21.06.2016 16:50

Views: 2

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download