Why do I get a syntax error when using the FBox "PCD7.D120"?

FAQ #101239

When placing an FBox "PCD7.D120" it is not possible to build the project anymore with PG5 1.4.300 due to a syntax error.

 

Symptom
When placing an FBox "PCD7.D120" it is not possible to build the project anymore. On build the error message "Error 31: C:\Program Files\SAIA-Burgess\PG5 1_4\Libs\Std\sfupdis5.srx: Line 323: Syntax error" is shown and the build fails.

Reason
The error message is shown because of an error on the SFup base library which is distributed with PG5 1.4.300.

Solution
To fix the error please install the library S-Fup Base Library version 2.6.100 or higher (installer file "S-Fup Base Library_V2_6_100_ml.exe").
This FBox library can be obtained from the support site www.sbc-support.ch (Section "Software"-->"PG5"-->"PG5 1.4"-->"FBox libraries").

 

Categories

Local FAQ Deutschland / PG5 1.4 FBox Libraries

PCD7 / D1xx

Last update: 27.05.2015 20:28

First release: 19.06.2009 12:56

Views: 2735

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download