The XOB 8 is no longer called on the systems Saia PCD® COSinus.

FAQ #101137

The XOB 8 who is called when the firmware detects an invalid instruction (Invalid OPC) in the user program is no longer called on the systems Saia PCD® COSinus (PCD3, PCD2.M5, PCD2.M480).

 

On the new systems, the control of the Invalid OPC is executed at the startup during the precompilation. So the XOB 8 will never be called.
This new mechanism is implemented to increase the speed and the flexibility of the systems Saia PCD® COSinus.

 

Categories

PCD2 / _Firmware Classic

PCD3 / _Firmware Classic

Last update: 01.06.2015 01:13

First release: 16.02.2009 14:29

Views: 1494

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download