Is there a list and description of the predefined container variables used on a Windows CE Micro-Browser?
FAQ #101002
With these container variables you can control the behaviour of the Micro-Browser, get panel specific information, launch and control applications which run in parallel to the Micro-Browser, control hardware features (e.g. audio, LCD back light) and write local data to the panel.
Please take note that especially the hardware related settings depend on the specific hardware platform and are not allways available; the XSCALE CPU (PCD7.D5xxxTXxxx) doesn't support audio.
See below mentioned a list of container variables for the Windows CE Micro-Browser:
| "MB_VERSION" | shows version of the xml configuration file |
| "MB_APP_VERSION" | shows version of the MicroBrowser |
| "MB_OS_VERSION" | shows version of the OS |
| "MB_PLATFORM" | shows the platform name, is one of the following "uBT", "uBCE", "uBXP", ... |
| "MB_SCREEN_WIDTH" | shows the width of the screen |
| "MB_SCREEN_HEIGHT" | shows the height of the screen |
| "MB_IpAddress" | shows the IP address of the panel |
| "MB_Subnet" | shows the subnet mask of the panel |
| "MB_Gateway" | shows the gateway address of the panel |
| "MB_Volume" | this container is used to get and set the volume in percent |
| "AUTOINCRCO" | this container is incremented on every period |
| "BLINKCO" | is AUTOINCRCO modulo 2 |
| "MB_InactivityCounter" | this container counts up every second. It is reset to 0 on any mouse or key actions of the user |
| "MB_StartProcess" | this container is used to write the name of the application to start |
| "MB_ExeToTop" | this container is used to write the name of the program to bring on the top |
| "MB_BringWindowToTop" | this container is used to write the name of the window, or a part of it, to bring the application on the top. writing "_self" will bring the MicroBrowser on top |
| "MB_WakeUp" | write 1 to wake up the computer and to stop the screen saver |
| "MB_Backlight" | write 0 or 1 to turn off/on the display or the LCD backlight |
| "MSGBOX_NR" | show the number of messages appended in the message box |
| "MessageBoxCO" | show the text in message box |
| "MB_UpdateAfterPpoWrite" | write "0" or "1" to improve the reaction time after writing on any PPO |
| "MB_UpdateAfterCoWrite" | write "0" or "1" to improve the reaction time after writing on any CO |
| "@MODAL_FOREGROUND" | write "0" or "1" to disable or enable the modal foreground teq |
| "@LANGUAGE" | to write the name of the new CSV file to load |
| "@MB_FKEY_EVENT" | show the last function key proceed |
| "@MB_FULL_REDRAW" | write "0" or "1" to disable or enable the full redraw mode |
| "_KEYPAD" | used by the keypad teq to edit the value |
| "_KEYPAD_DEST_NAME" | used by the keypad teq to save the name of the destination to write |
| "_KEYPAD_DEST_TYPE" | used by the keypad teq to save the type of the destination to write |
| "_KEYPAD_SHIFT" | used by the keypad teq as caps-lock |
| "_KEYPAD_OPEN" | used by the keypad teq to open a new keypad |
| "_KEYPADCLOSE" | used by the keypad teq to close the keypad, or to switch between alpha-pad and numeric-pad |
| "_KEYEVENT" | by the keypad teq to append new characters used |
| "_KEYPAD_TF_FOCUS" | used by the keypad teq to select the editable text field after closing the keypad |
| "MB_PERCO_0" | Persistent container 0 stored in "uBrowsCo.xml" |
| "MB_PERCO_1" | Persistent container 1 stored in "uBrowsCo.xml" |
| "MB_PERCO_2" | Persistent container 2 stored in "uBrowsCo.xml" |
| ... | |
| "MB_PERCO_19" | Persistent container 19 stored in "uBrowsCo.xml" |
Categories
Web Editor5
PCD7 / D5xxx (Windows CE)
Last update: 27.05.2015 05:02
First release: 15.08.2008 13:17
Views: 3630
