Are E-Mails sent by a PCD limited in size?

FAQ #100995

 

General information
for all EMail messges sent by a PCD, the following limitations of the EMail elements apply. Additionally, the maximum size of a message is limited depending on the system from which the message is sent (PCD7.F655 or PCD3/PCD2.M5). Please refer to the table below for the maximum size of the EMail elements:

Element	Max. size
sender address	63 characters
recipients address	127 characters
subject	127 characters
content	see below

PCD7.F655
The maximum text size of the whole message is 780 characters for EMails sent by the PCD7.F655. This amount is calculated as:
 sender address + recipients addresses + subject + body text (content)
If the message is HTML-formatted, all characters from the embedded HTML-Tags are part of the sended body text! Attachments are not supported on a system equipped with a PCD7.F65x.

PCD3.Mxxxx and PCD2.M5xxx
The maximum text size of the whole message is 3072 characters. This amount is calculated as:
 sender address + recipients addresses + subject + body text (content)
If the message is HTML-formatted, all characters from the embedded HTML-Tags are part of the sended body text! Only one single file attachment per E-Mail is allowed. The attached file must not be bigger than 1 MB.