What can be done if the memory card PCD3/7.R550/R551 is no longer visible over FTP?

FAQ #100933

This can happen if the PCD is executing a compression of the flash memory is compressing.

 

Such a compression can take up to a several minutes. If the module doesn't return to the nomal status it can be formated using the F-Box Memory Managment or the System Functions for Instruction List programming.

Note regarding the "Memory Management" F-Box
The parameter "Block size" in the F-Box has to be set to 2048 (default block size) instead of "default". Otherwise the formatting will not be executed properly in every case. To execute the formatting, click on the "Select" button first and afterwards on the "Execute" button. 

 

Categories

PCD7 / Rxxx

PCD3 / Rxxx

Last update: 27.05.2015 08:08

First release: 07.05.2008 13:53

Views: 2703

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download