Which RS232 signals are needed for the RS232 communication between the MB-Display and the PCD?

FAQ #100731

Only the RX and TX signals are needed.

 

        To communicate on RS232 mode between the PCD and MB-Display (Port 0) only the RX and the TX signals are needed.

 

Categories

PCD7 / D4xx (MB Panel)

Last update: 30.05.2015 10:47

First release: 04.07.2007 07:21

Views: 1469

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download