The init-string with PIN-code for the GSM modem (G736-AS2) does not work on the PCD3
FAQ #100654
If the PIN-code is activeted on the SIM-card the following init-string is needed: ATS0=2+CPIN=nnnn\r Unfortunately this string does not work on the PCD3.
Problem
The init-string with PIN-code "ATS0=2+CPIN=nnnn\r" does not work on the PCD3.
Reason
There is a problem in the firmware. It will be corrected in the next version >030.
Solution
Until a new version is available the GSM-modem will only work if the PIN-code is deactivated on the SIM-card. In urgent cases contact pcdsupport. A bugfix version will be available soon.
Categories
PCD3
PG5 2.0 / Modem
Last update: 31.05.2015 03:02
First release: 03.01.2007 10:17
Views: 3801