Is it possible to attach several PCDs over USB?

FAQ #100393

At the moment it is not possible to connect to several PCD's at the same time using the S-Bus USB channel.


Until now the communication "S-Bus USB" is realized as point to point connection. The communicaition driver (ScommDrv) will select the first SBC USB device that is listed by Windows and will establish a connection only to this device.
As conclusion, only one PCD may be attached to the PC over USB. In case two PCD's are to be prgrammed, the cable has to be unplugged of the first PCD and then be connected to the second PCD.



PG5 2.0 / USB

Last update: 19.05.2015 07:11

First release: 04.07.2005 08:50

Views: 2046

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.