Program from PCD7.R400 is not automatically copied into the PCD’s memory

FAQ #100357

With Firmware Version 1.201 the program who was stored in PCD7.R400 was not automatically copied into the PCD’s memory when the PCD2.M487 was powered off/on without battery.

 

The probelm is solved in the actual firmware 1.300.

 

Categories

xx7 Series / CPU and operating system

Last update: 29.05.2015 02:44

First release: 04.05.2005 14:58

Views: 1627

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download