PCD2.M480: SM1 (S-Bus Master Parity) on Port 1 is not supported!

FAQ #100186

There are some restriction on the PCD2.M480, the port 1 as Master Port doesn't support parity mode.

Note: The "Break mode" is not supported on the PCD2.M480!

 

 

Related FAQs:

Categories

PCD2 / M48x

Last update: 30.05.2015 13:27

First release: 09.07.2004 14:57

Views: 5880

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download