Why is it important that the motor driver is enabled after the initialisation of the H3xx?

FAQ #100132

It is absolutely necessary to enable the motor driver after the initialisation of an H3xx. Otherwise the motor will move unintendedly and uncontrolled.


The cause is that the D/A converter always will give out -10 Volts. As long as the module isn't properly initialised this signal will be given out.



PCD2 / Hxxx

Last update: 01.04.2015 21:42

First release: 12.06.2004 13:45

Views: 3136

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.