Are interrupt inputs and fast counter inputs available?

FAQ #100063

 

Yes. The PCD1.M137 has 1 interrupt input, the PCD2.M1x7 has 2 interrupt inputs (or 1 fast counter) and the PCD2.M487 has 4 interrupt inputs (or 2 fast counters) already built into the base unit. When a signal changes at the inputs (or when a count value is reached) an interrupt OB will be called in the application program. Further information may be obtained from Technical Information TI 26/353 (Operating system xx7) Detailed information on the programming of these functions may be consulted in Manual 26/797. This documentation can be downloaded under: www.sbc-support.ch/xx7/xx7doc.htm

 

Categories

xx7 Series / CPU and operating system

Last update: 24.05.2015 21:41

First release: 08.06.2004 14:13

Views: 7128

The requested software / document is no longer marketed by Saia-Burgess Controls AG and without technical support. It is an older software version which can be operated only on certain now no longer commercially available products.

Download