Input/output modules for Saia PCD3 controllers Analogue combined input/output module with galvanic isolation, 6 channels : 4 inputs, 14 bits, 0…10 V, 0(4)…20 mA, Pt 1000, Pt 500 or Ni 1000 (selectable by DIP switch) and 2 outputs, 12 bits, 0…10 V or 0(4)…20 mA (selectable by software FBox, FB)
Analogue input modules for Saia PCD3 controllers Universal analogue input module, 8 channels, 13 bits (12 bits+sign), selectable by software, 0…10 V, ±10 V, 0…20 mA, ±20 mA, Pt/Ni 1000, 0…2500 Ohm, 0…300 kOhm (for NTC sensors) (2 connectors type K included)
CPU base units for 4 plug-in I/O modules - Saia PCD3.M6 series PCD3 processor unit with 2 Ethernet TCP/IP, web and FTP server, file system, CPU with 2 MByte user program, 1 MByte SRam extension memory, 128 MByte user Flash memory with file system, clock (RTC), data protection 1-3 years, USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net/MPI/S-Bus
CPU base units for 4 plug-in I/O modules - Saia PCD3.M3 series PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 128 KByte user program, backup with on-board Flash memory, clock (RTC), USB port for PG5, up to 64 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
CPU base units for 4 plug-in I/O modules - Saia PCD3.M3 series PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 512 KByte user program, 128 MByte user Flash memory with file system, clock (RTC), USB port for PG5, up to 64 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
CPU base units for 4 plug-in I/O modules - Saia PCD3.M3 series PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 512 KByte user program, backup with on-board Flash memory, clock (RTC), USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
CPU base units for 4 plug-in I/O modules - Saia PCD3.M3 series PCD3 processor unit with Ethernet TCP/IP, web and FTP server, file system, CPU with 512 KByte user program, 128 MByte user Flash memory with file system, clock (RTC), USB port for PG5, up to 1024 I/O, 2 interrupt inputs, RS-485 for Profi-S-Net or S-Bus
Für den Fall, dass ein BACnet-Firmware-Modul auf eine PCD3.Mxxx0 oder eine PCD2.M5xx0 installiert wurde, und eine Zeitzone konfiguriert wurde, hat der Zeitstempel des Alarms S-Web einen Offset in die PCD-Zeit. Es könnte das gleiche Verhalten bei Verwendung die SNTP (Simple Network Time Protocol).[autotranslated]
Steckplätzen M1 und M2 eingesetzt werden. Das Modul kann in den Systemen PCD1.M2/M0, PCD2.M5, PCD3.M und auf dem programmierbaren MB-Bedienfeldern PCD7.D457VT5F, PCD7.D410VT5F und PCD [...] Produkt Index PCD7 Rxxx: Memory modules R610 Allgemein [...] PCD7.R610 uSD Flash Memory-Card mit Dateisystem
Farbe PCD7.T160 D-Sub 9-polig auf PCD Anschluss 2 PCD3.M3 und M6 A = RxD-/TxD-N grün D Pin 8 D B = RxD-/TxD-P rot D / Pin 3 / D Beispiel für den Port 3 der PCD3.M5540 als seriell-S-Bus RS485-Anschluss (Seriell-S-Bus) zwischen PCD3.M5540 Anschluss 3 (S-Net D-Sub verwendet als RS485 Seriell-S-Bus) und PCD2.M5540 Port 2 (Anschlussblock X 3): PCD3.M5540 (D-Sub "S-Net", port 3) PCD2.M5540, X 3, Anschluss2 ausgestattet mit einem PCD7.F110 Pin 3 Terminal 2 Pin 8 Terminal
